Sale!

Design And Construction Of A Power Supply Reversal Correcter Cum Preventer

When power-supply polarities of an electronic device are accidentally interchanged, the device runs the risk of damage. The danger can be avoided by adding this tiny circuit to the power supply section of the device.

Original price was: ₦ 3,000.00.Current price is: ₦ 2,999.00.

Description

ABSTRACT

When power-supply polarities of an electronic device are accidentally interchanged, the device runs the risk of damage. The danger can be avoided by adding this tiny circuit to the power supply section of the device. This power supply reversal correcter circuit will instantly correct the interchanged poles of the power supply and warn of the error by raising an alarm accompanied with a visual indication.

The control element is nothing but a relay (RL1). Its supply is made unidirectional by a series-connected diode (D1). Thus in normal state the relay is idle. This arrangement is connected in reverse across the power-supply output. The output of the add-on circuit, which is taken through the normally closed contacts of the relay, via fuse F1, supplies power to the load. This way, unwanted loading of the power supply by the relay is avoided. The normally closed (N/C) contacts of relay RL1 are connected to the input terminals of the power supply in the required polarity, while the normally open (N/O) contacts are connected to the reverse-polarity terminals.

TABLE OF CONTENTS

COVER PAGE

TITLE PAGE

APPROVAL PAGE

DEDICATION

ACKNOWELDGEMENT

ABSTRACT

CHAPTER ONE

1.0      INTRODUCTION

1.1      BACKGROUND OF THE PROJECT

  • PURPOSE OF THE PROJECT
  • AIM OF THE PROJECT
  • OBJECTIVE OF THE PROJECT
  • PURPOSE OF THE PROJECT
  • LIMITATION OF THE PROJECT
  • ADVANTAGES OF THE PROJECT
  • PROBLEM OF THE PROJECT
  • APPLICATION OF THE PROJECT
  • RESEARCH QUESTION
  • PROJECT ORGANISATION

CHAPTER TWO

LITERATURE REVIEW

  • OVERVIEW OF THE STUDY
  • REVIEW OF THE RELATED STUDY

CHAPTER THREE

3.0     CONSTRUCTION METHODOLOGY

3.1      BASIC OF THE SYSTEM

3.2      BLOCK DIAGRAM OF THE SYSTEM

3.3      SYSTEM OPERATION

3.4      CIRCUIT DIAGRAM

3.5      CIRCUIT DESCRIPTION

3.6     DESCRIPTION OF COMPONENTS USED

3.7      POWER SUPPLY UNIT

CHAPTER FOUR

4.0      TESTING AND RESULTS

  • CONSTRUCTION PROCEDURE AND TESTING
  • INSTALLATION OF THE COMPLET DESIGN
  • ASSEMBLING OF SECTIONS
  • TESTING OF SYSTEM OPERATION
  • COST ANALYSIS

CHAPTER FIVE

  • CONCLUSION
  • RECOMMENDATION
  • REFERENCES

Reviews

There are no reviews yet.

Be the first to review “Design And Construction Of A Power Supply Reversal Correcter Cum Preventer”

Your email address will not be published. Required fields are marked *