design and construction of a single phase auto-transformer of rating 1kva, 240v/110, 80 12v, 6v
The project presents here is on design and construct a single phase auto-transformer of rating 1kva, and step down voltage of 240v/110, 80, 12v, 6v.
An autotransformer is an electrical transformer with only one winding. In an autotransformer portions of the same winding act as both the primary and secondary. The winding has at least three taps where electrical connections are made. Autotransformers have the advantages of often being smaller, lighter, and cheaper than typical dual-winding transformers, but autotransformers have the disadvantage of not providing electrical isolation.
Autotransformers are often used to step up or step down voltages in the 110-117-120 volt range and voltages in the 220-230-240 volt range—for example. Providing 110 or 120V (with taps) from 230V input, allowing equipment designed for 100 or 120 volts to be used with a 230 volt supply
An autotransformer has a single winding with two end terminals, and one or more terminals at intermediate tap points. The primary voltage is applied across two of the terminals, and the secondary voltage taken from two terminals, almost always having one terminal in common with the primary voltage. The primary and secondary circuits therefore have a number of windings turns in common Since the volts-per-turn is the same in both windings, each develops a voltage in proportion to its number of turns. In an autotransformer part of the current flows directly from the input to the output, and only part is transferred inductively, allowing a smaller, lighter, cheaper core to be used as well as requiring only a single winding. One end of the winding is usually connected in common to both the voltage source and the electrical load. The other end of the source and load are connected to taps along the winding. Different taps on the winding correspond to different voltages, measured from the common end. In a step-down transformer the source is usually connected across the entire winding while the load is connected by a tap across only a portion of the winding. In a step-up transformer, conversely, the load is attached across the full winding while the source is connected to a tap across a portion of the winding.
HOW TO RECEIVE COMPLETE MATERIAL (I.E CHAPTER 1-5)
We made abstract available for everybody. If you wish to download complete material (i.e chapter 1-5) on this topic or any of the topics listed on this site. Before you order for any project topic from us, make sure your topics is on this site. Then make a payment into our bank account. Each topic is sold at N3000. After payment send us your payment details, that is, your name, teller no, amount paid, project topics and your email address to our contact phone number. The complete material would be sent to immediately we receive your payment alert.
CIRCUIT ORDER: for circuit order, send us the abstract of your project and your e-mail address to our contact phone number and then call us for confirmation and availability of the project circuit, and in less than one hour the circuit will be sent to your e-mail address.
ACCOMODATION: Free accommodation will also be given to any of our client who wishes to partner with us that love to know step by step and one-on-one on how to design and construction his or her project.
OUR TRAINING: We also offer training for students, I.T students and individuals on:
1. basics of electronics,
2. electronics drafting
3. one-on-one training on how to design and construct any of the topics listed on this site.
4.We also give project topics and material for all departments. For other departments, if you have topic(s) and you need the material, in order to know the availability of the topic(s), send your topic(s) and your department to our contact phone number, and in lest than 20mins you will receive feedback on the availability of the material on the topic(s) sent. But if you need topic(s), all you need to do is to inform us by sending your e-mail address and your department to our contact phone number and in less than 20mins it will be sent to your e-mail address. And any one who wishes to partner with us can also view abstract and chapter one for free through their e-mail.
Contact us if you have any question or deal related to our website or if you have any suggestion. Send your message or suggestion to firstname.lastname@example.org. We will reply your message within 12 hour if necessary or call Engr. Innocent on 07039832800(MTN) or 08153121183(GLO).
NOTE: The material contains everything you need for your project, and it will serve as a guide. Meaning that copying the material the way is written is CHEATNG
NOTE: we can also research any topic(s) that relate to topics or department on this site for you. And we also accept urgent work,that is, completing your project design and construction before a period of one week. And any of our clients who wish to know how to construct his or her project can also come to our office where he/she will learn step-by-step how to construct it so that at the end of the work he/she will be able to construct one for their own use. We also design tested OK project circuits for existence and non-existence project topics.
OUR OFFICE ADDRESS:
A AND O TRADING CO. NIG.
NO. 2 AKU ROAD(BESIDE BISHOP SHANAHAM HOSPITAL), NSUKKA,
CONTACT PHONE NO: 07039832800, 08153121183