AVALIABLE TOPICS / MATERIALS

DESIGN AND CONSTRUCTION OF 2-WAY WIRED INTERCOM


DESIGN AND CONSTRUCTION OF 80W AUDIO AMPLIFIER

DESIGN AND CONSTRUCTION OF 50W AUDIO AMPLIFIER

DESIGN AND CONSTRUCTION OF 200W UNINTERRUPTIBLE POWER SUPPLY

DESIGN AND CONSTRUCTION OF A FUEL INJESTION TEST PUMP

DESIGN AND CONSTRUCTION OF AN INTELLIGENT OVERHEAD TANK WATER LEVEL INDICATOR WITH DISPLAY AND ALARM

DESIGN AND CONSTRUCTION OF AUTOMATIC CHANGE OVER WITH GENERATOR TRIP OFF (USING A REMOTE CONTROL)

DESIGN AND CONSTRUCTION OF AN AUTOMATIC PHASE SELECTOR FOR 3-PHASE POWER SUPPLY

DESIGN AND CONSTRUCTION OF A BURGULAR ALARM

DESIGN AND CONSTRUCTION OF BATTERY CHARGER

Design and Construction of Solar power auto street light

DESIGN AND CONSTRUCTION OF NUMERIC CONTROLLED DOOR LOCKING SYSTEM


NATURAL RADIOACTIVITY OF  SOME LOCAL FOOD MATERIAL LIKE MILLET, LOCAL RICE, GUINEA CORN, MAIZE, BEANS, DRY  YAM, DRY CASSAVA AND SOYA BEANS

QUANTITATIVE DETERMINATION OF SOME ANTIMICROBIAL FACTOR IN BAOBAB LEAVES

CONSTRUCTION AND FABRICATION OF AN ICE-BLOCK MAKING MACHINE

DESIGN AND CONSTRUCTION OF AUTOMATIC BELL RINGER

Design and Construction of Portable fm transmitter

ELEMENTAL ANALYSIS OF SOME ELEMENT CONTENT IN LINSEED OIL

DESIGN AND CONSTRUCTION OF AN ELECTRONICS NOTICE BOARD USING LED

DESIGN AND CONSTRUCTION OF A DIGITAL VOLTMETER USING AVR ATMEGA8 MICROCONTROLLER

DESIGN AND CONSTRUCTION OF DIGITAL CLOCK

DESIGN AND CONSTRUCTION AN AUTO TURN-OFF BATTERY CHARGER

DESIGN AND CONSTRUCTION OF A 3 WAY INTER-COMMUNICATION SYSTEM

DESISN AND CONSTRUCTION OF AN AUTOMATIC WASH BASIN TAP CONTROLLER

DESIGN AND CONSTRUCTION OF DENSITY BASED TRAFFIC SIGNAL SYSTEM USING MICROCONTROLLER

DESIGN AND CONSTRUCTION OF SIMPLE HYDROELECTRIC POWER STATION TURBINE

DESIGN AND CONSTRUCTION OF 500W AUDIO AMPLIFIER

DESIGN AND CONSTRUCTION OF AN INFRARED REMOTE CONTROLLED POWER SUPPLY-SWITCHING UNIT

DESIGN AND CONSTRUCTION OF SENSOR OPERATED AUTOMATIC DOOR OPEN/CLOSE SYSTEM

DESIGN AND CONSTRUCTION OF A SOUND ACTIVATED DEVICE

************************************

DESIGN AND CONSTRUCTION OF AN AUTOMATIC VOLTAGE STABILIZER

************************************

DESIGN AND CONSTRUCTION OF A 500W AUTOMATIC VOLTAGE STABILIZER

************************************

DESIGN AND CONSTRUCTION OF A 1KVA AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF A 1.5KVA AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION A THREE PHASE AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF A TRANSISTOR ANALYZER

THE DESIGN AND CONSTRUCTION OF ELECTRONIC BELL WITH INDICATING LIGHT

DESIGN AND CONSTRUCTION OF A METAL DETECTOR ROBOTIC VEHICLE

DIGITAL ALARM CLOCK USING 8051 MICROCONTROLLER (AT89C51)

DESIGN AND CONSTRUCTION OF TEMPERATURE SENSING  ALARM SYSTEM

DESIGN AND CONSTRUCTION OF AN FM RECEIVER USING IC

DESIGN AND CONSTRUCTION OF A SOLAR SPRINKLER IRRIGATION SYSTEM

DESIGN AND CONSTRUCTION OF A SOLAR CONTROLLED IRRIGATION SYSTEM

DESIGN OF A PHOTOVOLTAIC CELL WITH COPPEROXIDE ELECTRODE

DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED AUTOMATIC 3-PHASE SELECTOR

DESIGN AND CONSTRUCTION OF A PHASE FAILURE CONTROLLER FOR THREE PHASE EQUIPMENT

PEPPER GRINDING MACHINE WITH A DUAL POWER SUPPLY (ELECTRICITY AND FUEL)

DESIGN AND CONSTRUCTION THREE PHASE MOTOR OPERATION INDICATOR

DESIGN AND FABRICATION OF A MOBILE WATER SPRINKLER

THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER

DESIGN AND CONSTRUCTION OF A DIGITAL TIMETABLE DISPLAY

DESIGN AND CONSTRUCTION OF AN FM RECEIVER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC WATER LEVEL INDICATOR WITH ALARM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC WATER LEVEL CONTROLLER

SOCIAL PROBLEMS AS A PREDICTIVE FACTORS OF STUDENT ACADEMIC OUTCOME AND SOCIAL ADJUSTMENT(CASE STUDY OF UNIVERSITY OF PORTHARCOURT)

DESIGN AND CONSTRUCTION OF A BREAK FAILURE INDICATOR FOR FOUR WHEELS

DESIGN AND CONSTRUCTION OF A CAR DEMOBILIZING SYSTEM

DESIGN AND CONSTUCTION OF GPS CAR TRACKING SYSTEM

AUTOMATIC CAR BRAKE FAILURE INDICATOR AND ENGINE OVER HEATING ALARM

EVALUATION OF SUITABILITY OF LATRITE BLOCKS FOR CONSTRUCTION OF ANIMAL HOUSES

DESIGN AND CONSTRUCTION OF A WIRELESS CAR IMMOBILIZER

DESIGN AND CONSTRUCTION OF A 1000W POWER AMPLIFIER

CONSTRUCTION OF SOMOMETER AND DETERMINATION OF SOUND VELOCITY IN AIR

DESIGN AND CONSTRUCTION OF HEARING AIDS USING BLUETOOTH

DESIGN AND CONSTRUCTION OF HEARING AIDS

DESIGN AND CONSTRUCTION OF SOLAR POWERED REFRIGERATOR

DESIGN AND CONSTRUCTION OF AN UNTERUTIBLE POWER SUPPLY USING MICROPROCESSOR WITH LOW BATTERY ALARM

THE DESIGN AND CONSTRUCTION A 10KVA AUTOMATIC VOLTAGE STABILIZER USING MICROCONTROLLER AND DISPLAY

DESIGN AND CONSTRUCTION OF AN ELECTRONICS LETTER BOX

DESIGN AND CONSTRUCTION OF A RECHARGEABLE ELECTRONIC MOSQUITO REPELLENT

HIGH VOLTAGE FUSE BLOWN INDICATOR WITH LED DISPLAY

WIRELESS MOBILE CHARGING BY INDUCTIVE COUPLING

DESIGN AND CONSTRUCTION OF AN INDUCTIVE COUPLING BATTERY CHARGING

DESIGN AND CONSTRUCTION OF A 220V/110V STEP DOWN TRANSFORMER

CONSTRUCTION OF 220VAC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC GATE OPENNER USING INFRARED

DESIGN AND CONSTRUCTION OF A DIGITAL IC TESTER USING AT89s52 MICROCONTROLLER
 (FOR 74TTL SERIES DIGITAL ICs)

CONSTRUCTION OF A ELECTRIC STANDING FAN

DESIGN AND CONSTRUCTION OF A MACHINE OVERHEAT DETECTION WITH ALERT

DESIGN AND CONSTRUCTION OF A HIGH VOLTAGE FUSE BLOWN INDICATOR WITH LED DISPLAY

DESIGN OF MECHANICAL OIL WATER SEPERATOR

DESIGN AND CONSTRUCTION OF ANALCOHOL SENSING ALERT WITH ENGINE LOCKING

DESIGN AND IMPLIMENTATION OF INTERCOM

DESIGN AND CONSTRUCTION OF A KEYPAD CONTROL FOR MULTIPLE APPLIANCES

DESISN AND CONSTRUCTION OF A MICROCONTROLLER BASED OVEN TEMPERATURE CONTROL WITH DIGITAL DISPLAY

DESIGN AND CONSTUCTION OF LPG (LIQUIDIFIED PETROLEUM GAS) ALARMING SYSTEM

DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED AUTOMATIC 3-PHASE SELECTOR

DESIGN AND CONSTRUCTION OF A VARIABLE 12V POWER SUPPLY

DESIGN AND CONSTRUCTION OF A TRANSFORMERLESS AUTOMATIC 6V 4.5AH BATTERY CHARGER

THE DESIGN AND CONSTRUCTION OF ELECTRONIC DOOR BELL

DETERMINATION OF SATELITE FREQUENCY FOR FREE-TO-AIR (FTA) STATIONS ON ALL SATELLITES WITH FOOT PRINT COVERING A PARTICULAR AREA ON THE KU-BAND

DESIGN AND CONSTRUCTION OF A TRANSFORMERLESS POWER SUPPLY

DESIGN AND CONSTRUCTION OF RFID BASED GARAGE DOOR ENTRY

DESIGN AND CONSTRUCTION OF A 2.4KVA POWER INVERTERS

DESIGN AND CONSTRUCTION OF A SOLAR STANDING FAN

DESIGN AND CONSTRUCTION OF AN ELECTRIC OVEN

CONSTRUCTION OF A 3000mAh  RECHARGEABLE BATTERY CHARGER

DESIGN AND CONSTRUCTION OF A POWER BANK

DESIGN AND CONSTRUCTION OF A DIGITAL SIGN POST

DESIGN AND CONSTRUCTION OF AN ELECTRIC COOKER

WIND POWER GENERATION

DESIGN AND CONSTRUCTION A WIND POWER GENERATING SYSTEM

DESIGN AND CONSTRUCTION OF TWO MINUTES EMERGENCY KITCHEN LIGHTING SYSTEM

DESIGN AND CONSTRUCTION OF A 500W UNTERUTIBLE POWER SUPPLY

DESIGN AND CONSTRUCTION OF A 24V WIND TURBINE

THE DESIGN AND FABRICATION OF A CORN SHELLING MAC4HINE

DESIGN AND CONSTRUCTION OF MOBILE PHONE CALL INDICATOR

WIRELESS COMMUNICATIONS FOR VEHICLE SAFETY

DESIGN AND CONSTRUCTION OF A CAR PARKING GUARD CIRCUIT

DESIGN AND CONSTRUCTION OF A SMOKE DETECTOR ALARM USING PHOTO INTERUPTER AND 555 TIMER

DESIGN AND CONSTRUCTION OF A SOLAR COOKER

DESIGN AND CONSTRUCTION OF A 500W WIRELESS PUBLIC ADDRESS SYSTEM (PA SYSTEM)

DESIGN AND CONSTRUCTION OF LIGHT SENSITIVE ALARM

DESIGN AND CONSTRUCTION OF VOLTAGE SELECTOR USE IN THE LABORATORY   WITH VOLTAGE OUTPUT OF 12, 9, 6, 4.5 AND 3VOLTS

DESIGN AND CONSTRUCTION OF A DIGITAL THERMAL INCUBATOR

DESIGN AND CONSTRUCTION OF STREET LIGHT CONTROLLER AND MAINTENANCE

DESIGN AND CONSTRUCTION OF MOBILE TRANSMISSION DETECTOR

DESIGN AND CONSTRUCTION OF A LOW AND HIGH VOLTAGE MONITOR

DESIGN AND CONSTRUCTION OF A RAIN OPERATED WIPER

DESIGN AND CONSTRUCTION OF RFID BASED GARAGE DOOR ENTRY

DESIGN AND CONSTRUCTION A MINI SOLAR HOME  LANTERN USING LED

DESIGN AND CONSTRUCTION OF A HIGH (<40db) VHF – UHF RECEIVING ANTENNA

DESIGN AND CONSTRUCTION OF CELL PHONE DETECTOR

DESIGN AND CONSTRUCTION OF AN INTERCOMMUNICATION DEVICE

DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTOMATIC CHANGEOVER

CONSTRUCTION OF A SINGLE PHASE AUTOMATIC CHANGEOVER WITH CIRCUIT DIAGRAM AND CONSTRUCTION PICTURE

DESIGN AND CONSTRUCTION OF A SOLAR FAN

DESIGN AND CONSTRUCTION OF A 5KVA 24V SOLAR INVERTER

DESIGN AND CONSTRUCTION OF A SENSITIVE CLAP SWITCH

q

DESIGN AND CONSTRUCTION OF A CAR TIMING SECURITY SYSTEM

DESIGN AND CONSTRUCTION OF A 2000W POWER AMPLIFIER WITH 2 VIP MICRIPHONE, VCD PLAYER AND 2 EXTERNAL SPEAKER OF 150w

DESIGN AND CONSTRUCTION OF 5KVA (8-BATTERY) INVERTER USING 24VDC

DESIGN AND CONSTRUCTION OF A CELL PHONE DETECTOR

DESIGN AND CONSTRUCTION OF A SOLID STATE AUTOMATIC VOLTAGE REGULATOR

DESIGN AND CONSTRUCTION OF A SOLAR POWER BANK

DESIGN AND CONSTRUCTION OF A USB PHONE CHARGER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC ROOM LIGHT CONTROLLER WITH BIDIRECTIONAL VISITOR COUNTER.

DESIGN AND IMPLIMENTATION OF PYROMETER

THE DESIGN AND CONSTRUCTION A 3KVA AUTOMATIC VOLTAGE STABILIZER USING MICROCONTROLLER AND DISPLAY

DESIGN AND CONSTRUCTION OF A FAN HEATER

DESIGN AND CONSTRUCTION OF A ROOM HEATER

DESIGN AND CONSTRUCTION OF A SOLAR POWERED ILLUMINATION AND CHARGING SYSTEM IN AN OFFICE

DESIGN AND CONSTRUCTION OF A MOBILE READING LAMP WITH PHONE CHARGER

DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED WATER LEVEL CONTROLLER USING 89C52

THE DESIGN AND FABRICATION OF A CORN SHELLING MACHINE

CONSTRUCTION PRINCIPLES AND OPERATION OF 1000W AC VOLTMETER

WIRELESS HOSPITAL PATIENT EMERGENCY NURSE CALL-UP SYSTEM

THE DESIGN AND FABRICATION OF A GRAIN GRINDING MACHINE

DESIGN AND FABRICATION OF GRAIN DRYE

DESIGN AND CONSTRUCTION OF A MOBILE FORGE BLOWER

DESIGN AND FABRICATION OF VERTICAL ANIMAL FEED MIXER

DESIGN AND CONSTRUCTION OF A 500W UNTERUTIBLE POWER SUPPLY

DESIGN AND CONSTRUCTION OF POWER BOOSTER DEVICE USING IRONING AND HEATING ELEMENT ON A 650W GENERATOR

DESIGN AND CONSTRUCTION OF A 4-WAY TRAFFIC LIGHT

DESIGN AND CONSTRUCTION OF 3-WAY TRAFFIC LIGHT

DESIGN AND CONSTRUCTION OF 2-WAY TRAFFIC LIGHT

DESIGN AND CONSTRUCTION OF POWER BOOSTING DEVICE

DESIGN AND CONSTRUCTION OF POLICE SIREN

DESIGN AND CONSTRUCTION OF AN AUTOMATIC BATTERY CHARGER USING THYRISTOR(SCR)

DESIGN AND CONSTRUCTION OF A THREE PHASE AC AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC PHASE SELECTOR

DESIGN AND CONSTRUCTION OF 25AMPS SINGLE PHASE AUTOMATIC CHANGE OVER

DESIGN AND CONSTRUCTION 4-CHANNEL MICROPHONE MIXER

DESIGN, CONSTRUCTION AND TESTING OF WHEELBARROW

DESIGN AND CONSTRUCTION OF A COMPUTER NETWORK TESTER

DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING 1KVA, 240V/110, 80 12V, 6V

SIMULATION OF A SPACE VECTOR PWM CONTROLLER FOR A THREE-LEVEL VOLTAGE-FED INVERTER MOTOR DRIVE

DESIGN AND CONSTRUCTION OF A 3-CHANNEL MICROPHONE MIXER

DESIGN AND CONSTRUCTION OF 100W AUDIO AMPLIFIER

DESIGN AND CONSTRUCTION OF A 180W HI-FI AMPLIFIER

DESIGN AND CONSTRUCTION OF 200W BASS GUITAR POWER AMPLIFIER

INTELLIGENT AUTOMATIC PLANT IRRIGATION SYSTEM

PERCEPTION OF YOUTH TOWARDS ENTERORENEURSHIP DEVELOPMENT

DESIGN AND CONSTRUCTION OF A BAKING OVEN

HELMINTHIC PARASITES OF DOMESTIC FOWLS IN LOKOJA KOGI STATE

DESIGN AND CONSTRUCTION OF A MOBILE IRON TRUCK

POWER TRANSFORMER WINDING THERMAL ANALYSIS CONSIDERING LOAD CONDITION AND TYPE OF OIL

DESIGN AND CONSTRUCTION OF AN ACCESS CONTROL SYSTEM

SIMULATION OF A SPACE VECTOR PWM CONTROLLER FOR A THREE-LEVEL VOLTAGE-FED INVERTER MOTOR DRIVE

ACCESS CONTROL SYSTEM

DESIGN AND FABRICATION OF AN INDUSTRIAL WHEELBARROW

DESIGN AND CONSTRUCTION OF A SOLAR BATTERY CHARGER USING 15V/130W SOLAR PANEL

DESIGN AND CONSTRUCTION OF A STRESS METER

DESIGN AND CONSTRUCTION OF SOLAR CHARGE CONTROLLER

DESIGN AND CONSTRUCTION OF A SECURITY GATE SYSTEM

DESIGN AND CONSTRUCTION AN FM RECEIVER USING IC TDA 7000

DESIGN AND FABRICATION OF CHILDREN SWING

DESIGN AND CONSTRUCTION OF AN ELECTRICAL CHANDELIER

DYNAMIC ANALYSIS OF SHUNT WOUND D.C MOTOR

DESIGN AND IMPLEMENTATION OF A WALKIE-TALKIE

DESIGN AND CONSTRUCTION OF A TRANSCEIVER

DESIGN AND CONSTRUCTION OF TEMPERATURE CONTROL INCUBATOR

DESIGN AND CONSTRUCTION OF INTRUDER ALARM

DESIGN AND CONSTRUCTION OF POWER FAILURE ALARM

DESIGN AND CONSTRUCTION OF CAR DEMOBILIZING SYSTEM

DESIGN AND CONSTRUCTION OF CAR ANTI-THEFT DEVICE

DESIGN AND CONSTRUCTION OF A TV, AM AND FM ANTENNA BOOSTER 

DESIGN AND CONSTRUCTION OF AN EARTH FAULT RELAY FOR SINGLE PHASE POWER SYSTEM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC FENCE LIGHT SYSTEM

DESIGN AND CONSTRUCTION OF A HEADPHONE AMPLIFIER

A DYNAMIC MODEL OF AN EARTH FAULT RELAY FOR ONE PHASE POWER SYSTEM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC CHANGEOVER SWITCH USING CONTACTOR

EFFECTS OF AMOUNT AND WAVELENGTH OF LIGHT ON A SOLAR CELL

DESIGN AND CONSTRUCTION OF FET AMPLIFIER

A STUDY ON DUST EFFECT ON THE PERFORMANCE OF SOLAR PV PANEL

DESIGN AND CONSTRUCTION OF A 3KVA SOLAR INVERTER

ASSEMBLING OF A COMPUTER COMPONENTS

DESIGN AND CONSTRUCTIONOF A PASSIVE INFRARED (PIR) BASED AUTOMATIC DOOR SYSTEM

DESIGN AND CONSTRUCTION OF AN OPEN/CLOSE DOOR SENSOR

DESIGN AND CONSTRUCTION OF A REMOTE CONTROL GATE

DESIGN AND CONSTRUCTIONOF A
SENSOR OPERATED
AUTOMATIC DOOR SYSTEM

DESIGN AND CONSTRUCTION OF A PASSIVE INFRARED (PIR) BASED AUTOMATIC DOOR SYSTEM

DESIGN AND CONSTRUCTION OF COMPUTER NETWORK TESTER

ASSESSMENT OF POWER SYSTEM RELIABILITY

ENCRYPTION AND DECRYPTION

DESIGN AND CONSTRUCTION OF POWER FAILURE ALARM WITH AUTO GENERATOR STARTING DEVICE

DESIGN AND CONSTRUCTION OF UPS

DESIGN OF EXTERNAL LIGHTING USING CONVENTIONAL POWER SUPPLY

DESIGN AND CONSTRUCTION OF A VOICE OPERATED FIRE EXTINGUISHER VEHICLE

DESIGN AND CONSTRUCTION OF AN AUTOMATIC BATTERY CHARGER USING SCR

DESIGN AND CONSTRUCTION OF AN AUTOMATIC BATTERY CHARGER USING LM317

DESIGN AND CONSTRUCTION OF A 1.5KVA AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF RAIN ACTIVATED ALARM

DESIGN AND CONSTRUCTION OF BEEPER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC FENCE LIGHT SYSTEM

DESIGN AND CONSTRUCTION OF AN FM TRANSMITTER

DESIGN AND CONSTRUCTION OF POWER FAILURE ALARM

DESIGN AND CONSTRUCTION OF ALARM SYSTEM USING LIGHT DEPENDENT RESISTOR (LDR)

EFFECT OF WESTERN TV PROGRAM ON NIGERIAN YOUTHS

EFFECTS OF TEMPERATURE ON VISCOSITY OF WATER,MILK AND CORN OIL

DESIGN AND CONSTRUCTION OF TEMPERATURE CONTROL CIRCUIT

DESIGN AND CONSTRUCTION OF TRANSFORMER-LESS POWER SUPPLY

CONSTRUCTION OF PVS CONDUIT WIRING SYSTEM OF TWO BEDROOM BUNGALOW

DESIGN AND CONSTRUCTION OF A 12 VOLT BATTERY CHARGER

CONSTRUCTION OF AUTOMATIC CHANGE OVER WITH GENERATOR TRIP OFF

DESIGN AND CONSTRUCTION OF AN FM TRANSMITTER

DESIGN AND CONSTRUCTION OF POWER FAILURE ALARM

DESIGN AND CONSTRUCTION OF AN AC VOLTAGE REGULATOR/STABILIZER

DESIGN AND CONSTRUCTION OF AN UNINTERUPTIBLE POWER SUPPLY

DESIGN AND CONSTRUCTION OF INTRUDER ALARM

DESIGN AND CONSTRUCTION OF A SOLAR WATER HEATER

DESIGN AND CONSTRUCTION OF RAIN ACTIVATED ALARM

DESIGN AND CONSTRUCTION OF DARK-LIGHT ACTIVATED ALARM

DESIGN AND CONSTRUCTION OF AN 80W AUDIO AMPLIFIER

DESIGN AND CONSTRUCTION OF HEADPHONE AMPLIFIER

DESIGN AND CONSTRUCTION OF SOUND OR CLAP ACTIVATED ALARM

DESIGN AND CONSTRUCTION OF ASTABLE MULTIVIRATOR

DESIGN AND CONSTRUCTION OF SOLAR WATER HEATER

DESIGN AND CONSTRUCTION OF A D.C TO A.C INVERTER SYSTEM

DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTOMATIC CHANGE OVER SWITCH WITH PHASE SELECTOR

THE DESIGN AND CONSTRUCTION OF AN INVERTER

THE DESIGN AND CONSTRUCTION OF A THREE PHASE AUTOMATIC PHASE SELECTOR

DESIGN AND CONSTRUCTION OF A TWO LANE TRAFFIC LIGHT

THE DESIGN AND IMPLEMENTATION OF A FOUR – WAY TRAFFIC LIGHT CONTROL CIRCUIT.

DESIGN AND CONSTRUCTION OF A MULTIPERPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY

DESIGN AND CONSTRUCTION OF AN AUTOMATIC PHASE SELECTOR

THE DESIGN AND CONSTRUCTION OF ELECTRIC ARC WELDING MACHINE

DESIGN AND CONSTRUCTION OF SECURITY BEEPER

DESIGN AND CONSTRUCTION OF POLICE SIREN

DESIGN AND CONSTRUCTION REMOTE GATE CONTROLDESIGN AND CONSTRUCTION OF WATER LEVEL SENSOR

DESIGN AND CONSTRUCTION OF AUTOMATIC BATTERY CHARGERS USING SCR

GLOBALISATION IN TEACHING AND LEARNING IN NIGERIA

DESIGN AND CONSTRUCTION OF SCR TESTER

DESIGN AND CONSTRUCTION OF GUITAR HEADPHONE AMPLIFIER

DESIGN AND CONSTRUCTION OF VARIABLE POWER SUPPLY

DESIGN AND CONSTRUCTION OF MINIATURE FM TRANSMITTER

DESIGN AND CONSTRUCTION OF WATER LEVEL CONTROLLER

DESIGN AND CONSTRUCTION OF AUTO TURN-OFF BATTERY CHARGER

DESIGN AND CONSTRUCTION OF AUTOMATIC BATTERY CHARGERS

DESIGN AND CONSTRUCTION OF MINI MICROPHONE

DESIGN AND CONSTRUCTION OF 12VOLTS CAR BATTERY AUTOMATIC CHARGER WITH VOLTAGE LEVEL INDICATOR AND CHARGING PROCESS DISPLAY

DESIGN AND CONSTRUCTION OF 45W AUDIO POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF FIRE ALARM SYSTEM IN A TWO STOREYED BUILDING

DESIGN AND CONSTRUCTION OF AUTO WATER LEVEL CONTROLLER

DESIGN AND CONSTRUCTION OF REMOTE CONTROL AC LAMP

DESIGN AND CONSTRUCTION OF POWER AND AUDIO AMPLIFIER

DESIGN AND CONSTRUCTION OF POWER AMPLIFIER

DESIGN AND CONSTRUCTION OFAUTOMATIC PHASE SELECTOR WITH CHANGEOVER SWITCH FOR 3-PHASE POWER SUPPLY

DESIGN AND CONSTRUCTION OF A REMOTE CONTROLLED POWER SUPPLY UNIT

DESIGN AND CONSTRUCTION OF TRANSISTOR POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF AN ELECTRICAL MEGAPHONE

DESIGN AND CONSTRUCTION OF 100W AUDIO AMPLIFIER

THE DESIGN AND CONSTRUCTION OF 1000VA STABILIZER

DESIGN AND CONSTRUCTION OF 2000W INVERTER SYSTEM

DESIGN AND CONSTRUCTION OF BRAKE LIGHT FLASHER

DESIGN AND CONSTRUCTION OF AUDIO MEGAPHONE

DESIGN AND CONSTRUCTION OF 4-CHANNEL AUDIO MIXER

DESIGN AND CONSTRUCTION OF HIGH QUALITY 150W POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF A 500W TRANSISTOR AMPLIFIER

THE DESIGN AND CONSTRUCTION OF A 40 WATT HI-FI AMPLIFIER

DESIGN AND CONSTRUCTION OF 45W POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF 600W AMPLIFYING CIRCUIT

DESIGN AND CONSTRUCTION OF 2KVA MODIFIED SINEWAVE INVERTER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC BATTERY CHARGER USING LM555

DESIGN AND CONSTRUCTION OF A 2000VA (2KW) AC VOLTAGE STABILISER

DESIGN AND CONSTRUCTION OF 10-INPUT MICROPHONE MIXER

DESIGN AND CONSTRUCTION OF 60W POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF 300W HI-FI AMPLIFIER

DESIGN AND CONSTRUCTION OF AUDIO PREAMPLIFIER WITH TONE CONTROL

DESIGN AND CONSTRUCTION OF 5-CHANNEL EQUALIZER

DESIGN AND CONSTRUCTION OF HOME AUDIO AMPLIFIER

DESIGN AND CONSTRUCTION OF STEREO POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF TAPE-RADIO-MIC AUDIO INPUT AMPLIFIER

DESIGN AND CONSTRUCTION OF 180W AMPLIFIER

THE DESIGN AND CONSTRUCTION OF A DC TO AC POWER INVERTER INCORPORATED WITH AN AUTOMATIC SWITCH OVER BATTERY CHARGER

DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM

DESIGN AND CONSTRUCTION OF PUBLIC ADDRESSING SYSTEM

DESIGN AND CONSTRUCTION OF A 20W WIRELESS PUBLIC ADDRESSING SYSTEM

DESIGN AND CONSTRUCTION OF REMOTE CONTROL GATE

DESIGN AND CONSTRUCTION OF A CONSTANT POWER SUPPLY GENERATOR USING DC SOURCE

DESIGN AND CONSTRUCTION OF 5KVA MODIFIED SINE WAVE CONVERTER

DESIGN AND CONSTRUCTION OF AUTOMATIC OVEN CONTROLLER

DESIGN AND CONSTRUCTION OF 200W BASS GUITAR POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF WATER LEVEL CONTROLLER

DESIGN AND CONSTRUCTION OF SOUND OR CLAP ACTIVATED ALARM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF SOUND DETECTOR WITH ALARM SYSTEM

DESIGN AND CONSTRUCTION OF 25AMPS SINGLE PHASE AUTOMATIC CHANGE OVER

DESIGN AND CONSTRUCTION OF A 1.5KVA POWER INVERTER

DESIGN AND CONSTRUCTION OF DIGITAL INCUBATOR

CONSTRUCTION OF AN INTRUDER ALARM SYSTEM

DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING 1KVA, 240V/110, 80 12V, 6V

DESIGN AND CONSTRUCTION OF TEMPERATURE CONTROL OVEN

SERVOMOTOR MAGNETIC RESONANCE IMAGING (MRI)

DESIGN AND CONSTRUCTION A 220 VAC AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF UNDER AND OVER VOLTAGE POWER PROTECTION SYSTEM

DESIGN AND CONSTRUCTION A 220 VAC AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF UNDER AND OVER VOLTAGE POWER PROTECTION SYSTEM

THE CONSTRUCTION OF A 3-PHASE MOTOR OPERATION INDICATOR

DESIGN AND CONSTRUCTION OF BASS POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF 2.5 KVA VOLTAGE STABILIZER

THE DESIGN AND CONSTRUCTION OF AN UNINTERRUPTED POWER SYSTEM (UPS)

CONSTRUCTION OF 200W UNINTERRUPTIBLE POWER SUPPLY

THE DESIGN OF A 500WATTS UNINTERRUPTIBLE POWER SUPPLY WITH VOLTAGE LOW INDICATOR [INVERTER]

CONSTRUCTION OF AN AUTOMATIC CHANGE OVER SWITCH (3.7KVA)

DESIGN AND CONSTRUCTION OF A MOTION SENSOR LIGHT CONTROL SYSTEM

DESIGN AND CONSTRUCTION OF AN ENERGY CONSUMPTION INDICATOR

DESIGN AND CONSTRUCTION OF RFID BASED GARAGE DOOR ENTRY

DETERMINATION OF SOME DISSOLVED SOME CORROSIVE METAL (CADMIUM, ARSENIC, CHROMIUM AND LEAD) ION IN DRINKING WATER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC MOTION SENSOR

DESIGN AND CONSTRUCTION OF A GSM BASED FIRE ALARM SYSTEM

DESIGN AND CONSTRUCTION OF A FINGERPRINT AUTENTICATION SYSTEM

THE DESIGN AND CONSTRUCTION OF REMOTE ACTIVATED ELECTRONIC DOOR BELL

ANALYSIS OF CONTROLLING INDUCTION MOTOR USING STAR –DELTA

NETWORK TRAFFFIC ARE NORMALLY DETECTIVE

ONLINE HANDWRITING SCRIPT RECOGNITION

DESIGN AND CONSTRUCTION OF A DIGITAL FREQUENCY COUNTER

DESIGN AND CONSTRUCTION OF A WIRELESS DOOR BELL

NOISE REDUCTION USING FUZZY IMAGE FILTERING

DESIGN AND CONSTRUCTION OF A MULTIPURPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY

DESIGN AND CONSTRUCTION OF A 1KVA POWER INVERTER

DESIGN AND CONSTRUCTION OF NO-POLLUTION-NO-NOISE POWER GENERATOR

DESIGN AND IMPLIMENTATION OF A 200A AUTOMATIC CHANGEOVER SWITCH WITH PHASE SELECTOR AND POWER FAILURE ALARM

DESIGN AND CONSTRUCTION OF A WIRELESS DOOR BELL

DESIGN AND CONSTRUCTION OF A WIRELESS DC MOTOR SPEED AND DIRECTION CONTROL USING RADIO FREQUENCY

THE DESIGN AND CONSTRUCTION OF A WIRELESS DC MOTOR SPEED CONTROLLER USING INFRARED

DESIGN AND CONSTRUCTION OF A WIRELESS DC MOTOR SPEED CONTROLLER

DESIGN AND CONSTRUCTION OF SINGLE CHIP 60W AMPLIFIER

THE DESIGN AND IMPLEMENTATION OF ELECTRONICS SEQUENTIAL SIGN PATTER DISPLAY

DESIGN AND CONSTRUCTION OF A 3 WAY INTER-COMMUNICATION SYSTEM

DESIGN AND CONSTRUCTION OF A SOLAR POWERED EMERGENGY LIGHTIGNG FOR A DOMESTIC BUILDING

DESIGN AND CONSTRUCTION OF AN AUTOMATIC PARKING LIGHT IN A CAR

APPLICATION OF FRONTAL DISPLACEMENT MECHANISM IN MICROBIAL ENHANCED OIL RECOVERY

THE USE OF MICROBES AS MOBILITY CONTROL AGENTS DURING MEOR

DESIGN AND CONSTRUCTION OF 5KVA DISTRIBUTION TRANSFORMER OF 240/110V, 24V,12V

DESIGN AND CONSTRUCTION OF A 6V and 12 VOLTS AUTHOMATIC BATTERY CHARGER

FACTORS INFLUENCING TRUANCY AMONG STUDENTS IN SECONDARY SCHOOL

DESIGN AND CONSTRUCTION OF 2-WAY TRAFFIC LIGHT

DESIGN AND CONSTRUCTION OF 3-WAY TRAFFIC LIGHT

DESIGN AND CONSTRUCTION OF A 4-WAY TRAFFIC LIGHT

FACTORS AFFECTING THE MICROSCOPIC DISPLACEMENT EFFECIENCY IN ALKALINE FLOODS

DESIGN AND CONSTRUCTION OF WIRELESS LOAD CONTROLLER BY GSM

DESIGN AND CONSTRUCTION OF A 5KVA AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF A 10KVA AUTOMATIC VOLTAGE STABILIZER

ASSEMBLING OF PENTIUM-4 COMPUTER

ASSEMBLING OF A COMPUTER SYSTEM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC SWITCHING STREET LIGHT

DESIGN AND CONSTRUCTION OF A STREET LIGHT

DESIGN AND CONSTRUCTION OF A 3.5KVA MODIFIED SINE WAVE INVERTER

DESIGN AND CONSTRUCTION
OF AN OPEN AND CLOSE DOOR SENSOR

DESIGN AND CONSTRUCTION OF A DC TO AC POWER INVERTER INCORPORATED WITH BATTERY CHARGER(1

DESIGN AND CONSTRUCTION OF AN INTELLIGENT EMERGENCY LIGHT SYSTEM

DESIGN AND CONSTRUCTION OF A D.C TO A.C INVERTER SYSTEM(2)

DESIGN AND CONSTRUCTION OF A 2KVA D.C TO A.C INVERTER SYSTEM

DESIGN AND CONSTRUCTION OF A 2.5KVA D.C TO A.C INVERTER SYSTEM

DESIGN AND CONSTRUCTION OF A 3.5KVA D.C TO A.C INVERTER SYSTEM

DESIGN AND CONSTRUCTION OF A 1KVA D.C TO A.C INVERTER SYSTEM

DESIGN AND CONSTRUCTION OF A PURE SINE WAVE INVERTER

DESIGN AND CONSTRUCTION Of A CAR CIGARETTE LIGHTER

DESIGN AND CONSTRUCTION OF AN INFRARED REMOTE CONTROLLED POWER SUPPLY-SWITCHING UNIT

DESIGN AND PLANNING OF BASE TRANSCIEVER STATION

DESIGN AND CONSTRUCTION OF A REMOTE CONTROLLED FAN REGULATOR

DESIGN AND CONSTRUCTION OF A FLOATING SWITCH

DESIGN AND CONSTRUCTION OF A SOLAR CELL PHONE CHARGER

DESIGN AND CONSTRUCTION OF A TOUCH ACTIVATED SWITCH

ASSEMBLING OF HIGH AND LOW VOLTAGE TRANSMISSION LINE ACCESSORIES

DESIGN AND CONSTRUCTION OF NUMERIC KEYPAD LOCK

DESIGN AND CONSTRUCTION OF A TEMPERATURE CONTROL INCUBATOR

CONSTRUCTION OF A TEMPERATURE CONTROL ELECTRIC KETTLE

DESIGN AND CONSTRUCTION OF AN FM TRANSMITTER(2)

DESIGN AND CONSTRUCTION OF A SMOKE DETECTOR

DESIGN AND CONSTRUCTION OF A CAR IMMOBILIZING SYSTEM

DESIGN AND CONSTRUCTION OF A CAR DEMOBILIZING SYSTEM

DESIGN AND CONSTRUCTION OF A MOBILE INCOMING CALL INDICATOR

DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTOMATIC CHANGEOVER SWITCH WITH PHASE SELECTOR

DESIGN AND CONSTRUCTION OF PHASE CHANGER FOR THREE POWER SUPPLY

DESIGN & CONSTRUCTION OF 3-INPUT PUBLIC ADDRESSING SYSTEM

DESIGN AND CONSTRUCTION OF A SHADOW DETECTOR

INFRARED(IR) BASED SHADOW DETECTOR WITH AN ALARM 

DESIGN AND CONSTRUCTION OF AN INFRARED AUDIO TRANSMITTER AND RECEIVER

DESIGN AND CONSTRUCTIONOF A
PASSIVE INFRARED (PIR) BASED AUTOMATIC DOOR SYSTEM

A SEMINAR TOPIC
ON SENSORS FOR HUMAN PRESENCE

DESIGN AND CONSTRUCTION OF A CLOSE CIRCUIT MONITOR

DESIGN AND CONSTRUCTION OF AN FM TRANSMITTER (3)

DESIGN AND CONSTRUCTION OF AN ELECTRONIC MOSQUITO REPELLENT CIRCUIT

DESIGN AND CONSTRUCTION OF TEMPERATURE SENSING ALARM SYSTEM

DESIGN AND CONSTRUCTION OF  A  HOT WATER GEYSER CONTROLLER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC DOOR BELL ALARM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC TURN OFF SOLDERING IRON

DESIGN AND CONSTRUCTION OF A LUGGAGE SECURITY ALARM SYSTEM

DESIGN AND CONSTUCION A DC MOTOR CONTROL SYSTEM USING PULSE WIDTH MODULATION

DESIGN AND CONSTRUCTION OF SOLAR INVERTER

HND/B.SC ELECTRICAL/ELECTRONICS FREE PROJECT TOPICS

DESIGN AND CONSTRUCTION OF A PROXIMITY DETECTOR

DESIGN AND CONSRUCTION OF A POWER FAILURE ALARM WITH AUTO GENERATOR GENERATOR STARTING DEVICE

DESIGN AND CONSTRUCTION OF A WATER LEVEL CONTROLLER USING MICROCONTROLLER

DESIGN AND CONSTRUCTION OF A THYRISTOR CONTROLLED AUTOMATIC BATTERY CHARGER

DESIGN AND CONSTRUCTION OF AN ANTI-THEFT ALARM FOR VEHICLE  

DESIGN AND CONSTRUCTION OF ANELECTRIC SHOCK GUN

DESIGN AND CONSTRUCTION OF AN
AUTOMATIC ROOM-LOCK AND LIGHT SYSTEM
  

DESIGN AND CONSTRUCTION OF A KEYPAD CONTROL FOR MULTIPLE APPLIANCES 

DESIGN AND CONSTRUCTION OF A MEDICINE-TIME REMINDER

DESIGN AND CONSTRUCTION OF AN RJ45 CABLE TESTER

DESIGN AND CONSTRUCTION OF DIGITAL INCUBATOR

DESIGN AND CONSTRUCTION OF DIGITAL CALENDAR

DESIGN AND CONSTRUCTION OF A 6VOLTS BATTERY CHARGER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC GATE

DESIGN AND CONSTRUCTIONOF A
REMOTE CONTROL GATE FOR HOMES

DESIGN AND CONSTRUCTION OF A THREE PHASE SQUIRREL CAGE INDUCTOR MOTOR

DESIGN AND CONSTRUCTION OF SOLAR DRYER

DESIGN AND CONSTRUCTION OF AN ANALOGUE CAPACITANCE METER

DESIGN AND CONSTRUCTION OF A SOLAR CHARGER CONTROLLER

DESIGN AND CONSTRUCTION OF A SOLAR WATER HEATER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC BATHROOM LIGHT

DESIGN AND CONSTRUCTION OF A STEP SWITCH SELECTOR

DESIGN AND CONSTRUCTION OF A 9-WAY CLAP ACTIVATED SWITCH

DESIGN AND CONSTRUCTION OF A CLAP ACTIVATED SWITCH USING TRANSISTORS

DESIGN AND CONSTRUCTION OF A SENSITIVE CLAP SWITCH

DESIGN AND CONSTRUCTION OF A CLAP ACTIVATED SWITCH USING 555 TIMERS

DESIGN AND CONSTRUCTION OF AN AC CONTINUITY TESTER

DESIGN AND CONSTRUCTION OF A CONTINUITY TESTER

DESIGN AND CONSTRUCTION OF A 220V/12V STEP DOWN TRANSFORMER

DESIGN AND CONSTRUCTION OF A SALT TASTER

DESIGN AND CONSTRUCTION OF AN ELECTRONICS LETTER BOX

DESIGN AND CONSTRUCTION OF AN FM WIRELESS MICROPHONE

DESIGN AND CONSTRUCTION OF A 6V RECHARGEABLE LANTERN

DESIGN AND CONSTRUCTION OF A HOUSE BELL WITH INDICATING LIGHT

DESIGN AND CONSTRUCTION OF A RADIO FREQUENCY GSM SIGNAL JAMMER

DESIGN AND CONSTRUCTION OF A USB MOBILE CHARGER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC CHANGEOVER SWITCH

DESIGN AND CONSTRUCTION OF A HIGH AND LOW VOLTAGE CUT-OUT WITH DELAY AND ALARM

DESIGN AND CONSTRUCTION OF A HIGH AND LOW VOLTAGE CUT-OFF WITH TIME DELAY

DESIGN AND CONSTRUCTION OF A 500W POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF A 60W AUDIO AMPLIFIER

MECHANICAL ENGINEERING PROJECT TOPIC

DESIGN AND FABRICATION OF A LAWN MOWER

WATER RETICULATION INA WORKSHOP

CONSTRUCTION AND FABRICATION OF AN ICE-BLOCK MAKING MACHIINE

DESIGN AND FABRICATION OF DEEP FREEZER

DESIGN AND FABRICATION OF A MOBILE REFRIGERATOR

DESIGN AND FABRICATION OF A WOOD LATHE MACHINE

DESIGN AND CONSTRUCTION OF A COAL- FIRE POWER GENERATOR

REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION

DESIGN AND FABRICATION OF A DUST EXTRACTOR

FUEL CELLS ON AEROSPACE

ELECTRICAL DESIGN AND DRAFTING OF A STANDARD SWIMMING POOL

DESIGN AND CONSTRUCTION OF A FIRE DETECTORUSING MQ-2 SENSOR

DESIGN AND CONSTRUCTION OF AN AUTOMATIC FIRE ALARM USING MQ-2 SENSOR

DESIGN AND CONSTRUCTION OF A 6V CELL PHONE BATTERY CHARGER

DESIGN AND CONSTRUCT A THREE PHASE AUTO-TRANSFORMER OF RATING 2.5KVA, AND STEP DOWN VOLTAGE OF 415 AND SECONDARY TAPS OF 0.,180V, 200V, 230V AND 240V

FAILURE ANALYSIS OF A POWER HACKSAW MACHINE

CONSTRUCTION CLASS CHAIR AND TABLE

DESIGN AND CONSTRUCTION OF A TRANSISTOR TESTER

DESIGN AND CONSTRUCTION OF AN AUTMATIC TRANSFER SWITCH

EFFICIENT USE OF LIGHTEMITTING DIODE

DESIGN AND CONSTRUCTION OF A 12 VOLTS AUTHOMATIC BATTERY CHARGER WITH CHARGING PROGRESS   AND CHARGING LEVEL INDICATOR

ASSEMBLING OF A 5KVA AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF BURGLAR ALARM SYSTEM

DESIGN AND CONSTRUCTION OF GSM BASED HOME SECURITY SYSTEM


DESIGN AND CONSTRUCTION OF AN AUTOMATIC METER READING DEVICE

DESIGN AND CONSTRUCTION OF FINGERPRINT BASED SECURITY SYSTEM

 

WIRELESS PATIENT HEARTBEAT AND TEMPERATURE MONITORING SYSTEM


THE DESIGN AND CONSTRUCTION OF A 220 / 12 VOLTS SINGLE PHASE STEP-DOWN TRANSFORMER


THE DESIGN AND CONSTRUCTION OF A 40 WATT HI-FI AMPLIFIER


DESIGN AND CONSTRUCTION OF A 3 WAY INTER-COMMUNICATION SYSTEM

THE DESIGN AND CONSTRUCTION OF A THREE PHASE AUTOMATIC PHASE SELECTOR

THE CONSTRUCTION OF A BATTERY CHANGER USING SILICONCONTROLLED REGULATOR (SCR)

THECONSTRUCTION OF A 12 VOLT LEAD ACID BATTERY CHARGER

THE CONSTRUCTION OF AN AUTOMATIC CHANGE OVER SWITCH

THE CONSTRUCTION OF C.D SPEAKER DOUBLE MAGNET OF SIX AND HALF INCHES DIAMETER 150 WATTS 18 IMPEDANCE


THE DESIGN AND CONSTRUCTION OF A MULTIPURPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY

THE
DESIGN AND CONSTRUCTION OF A MULTIPURPOSE SECURITY SYSTEM

THE
DESIGN AND CONSTRUCTION OF A  D.C TO A.C INVERTER SYSTEM

THE DESIGN AND CONSTRUCTION OF BATTERY CHARGER

THE CONSTRUCTION OF TWO FEET ELECTRONICS FLUORESCENT LAMP

THE DESIGN AND CONSTRUCTION OF A DC TO AC POWER INVERTER INCORPORATED WITH AN AUTOMATIC SWITCH OVER BATTERY CHARGER


THE DESIGN AND CONSTRUCTION OF AUTOMATIC FENCE LIGHT CONTROLLER

T
HE DESIGN AND CONSTRUCTION OF HOUSE BELL WITH INDICATING LIGHT

 

DESIGN AND CONSTRUCTION OF A 60W AUDIO AMPLIFIER


DESIGN AND CONSTRUCTION OF A PORTABLE KEROSENE PRESSURE-COOKER

DESIGN AND FABRICATION OF APRIMUS STOVE


DESIGN AND CONSTRUCTION OF A COMMON RAIL DIRECT INJECTION (CRD)
DESIGN AND FABRICATION OF GRAIN GRINDING MACHINE

DESIGN AND CONSTRUCTION OF AN ANTI-LOCK BRAKING SYSTEM (ABS)


DESIGN AND FABRICATION OF DRILLING MACHINE

DESIGN AND CONSTRUCTION OF FLOW NOZZLE


DESIGN AND FABRICATION OF A HEAT EXCHANGER

 

DESIGN AND CONSTRUCTION HOT STAMPING MACHINE

DESIGN AND FABRICATION OF A TURBOCHARGER


DESIGN AND CONSTRUTION WINDSHIELD WASHER


DESIGN AND FABRICATION OF GRAIN GRINDING MACHINE

DESIGN AND CONSTRUCTION OF A DRAWING BOARD

DESIGN AND FABRICATION OF A HAIR DRYER

DESIGN AND FABRICATION OF POPCORN MAKING MACHINE

DESIGN OF A WASHING MACHINE

DESIGN AND CONSTRUCTION OF A SOLAR OPERATED AUTOMATIC STREET LIGHT CONTROL SYSTEM

DESIGN AND CONSTRUCTION OF A SOLAR STREET LIGHT

DESIGN AND IMPLIMENTATION OF INTERCOM

DESIGN AND CONSTRUCTION AN AUTOMATIC VOLTAGE STABILIZER USING MICROCONTROLLER

AUTOMATIC WATER LEVEL CONTROLLER WITH WATER HEATER COMPARTMENT

DESIGN AND IMPLIMENTATION OF SOLAR/PC POWERED SMOKE DETECTOR

DESIGN AND CONSTRUCTION OF AN ENERGY CONSUMPTION INDICATOR

DESIGN AND FABRICATION OF A CORN SHELLER

DESIGN AND CONSTRUCTION OF A LAN CABLE TESTER

DESIGN AND FABRICATION OFA THRESHING MACHINE

REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION

DESIGN AND CONSTRUCTION OF DOOR LOCKING SECURITY SYSTEM USING GSM

REMOTE CONTROL DISH ANTENNA TRACKING SYSTEM

DESIGN AND CONSTRUCTION OF AN ELECTRONIC TOSS CIRCUIT

DESIGN AND CONSTRUCTION OF AN AUTOMATIC DOOR BELL WITH OBJECT DETECTION

DESIGN AND CONSTRUCTION OF A SPEECH AMPLIFIER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC LOAD CONTROLLER AND SHARING SYSTEM

DESIGN OF A VENDING MACHINE

DESIGN AND CONSTRUCTION OF A FREQUENCY COUNTER

DESIGN OF AN ENVIRONMENT MONITORING SYSTEM

AUTOMATIC LIGHT DIM DEEP CONTROLLER

DESIGN OF A FRICTIONLESS ELECTROMAGNETIC BRAKING SYSTEM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC STREET LIGHT CONTROLLER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC STREET LIGHT USING LDR AND RELAY

DESIGN AND CONSTRUCTION OF MULTIPLE LATHE TOOL POST

BANDWIDTH REQUIREMENT FOR COMMUNICATION AT UNI-AGRIC

TEMPORAL TEMPERATURE WARMING AND SETIMATION OF DIUNEL VARIABILITY FOR ENVIRONMENTAL AND EXOTIC HEALTH EFFECT

DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED WINDING MACHINE

DESIGN OF AN ACCIDENT ALERT IN MODERN TRAFFIC SYSTEM WITH CAMERA

DESIGN AND IMPLIMENTATION COURSE REGISTRATION AND EXAMINATIONVALIDATION USING
FINGERPRINT TECHNOLOGY

DESIGN AND FABRICATION OF A CORN SHELLER

ENVIRONMENTAL IMPACT ASSESSMENT ON HIGH WAY HAZARDS

FINE TUNING LOCAL AREA NETWORK AND DEPLOYING A MAILING SYSTEM USING MICROSOFT OUTLOOK

ASSESSMENT OF POWER SYSTEM RELIABILITY

DESIGN AND CONSTRUCTION OF A REMOTE CONTROL DISH ANTENNA TRACKING SYSTEM

PRODUCTION OF BLACK AND BROWN POLISH

 

DESIGN AND CONSTRUCTION OF A PURE SINE WAVE INVERTER SYSTEM
DESIGN AND CONSTRUCTION OF A ELECTRONIC TOSS

DESIGN AND CONSTRUCTION OF A DARK DETECTOR

DESIGN AND CONSTRUCTION OF A CONTROLLING OF TRANSFORMER FROM SUBSTATION

 

DESIGN AND CONSTRUCTION OF A BUS INFORMATION ALERT USING ZIGBEE


DESIGN AND CONSTRUCTION OF ABIOMETRIC AUTENTICATION SYSTEM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC SPEED CONTROLLER IN SCHOOLS AND COLLEDGES

DESIGN AND CONSTRUCTION OF AN AUTOMATIC LOAD CONTROLLER AND SHARING SYSTEM

DESIGN AND CONSTRUCTION OF AN ATM TERMINAL DESIGN BASED ON FINGER PRINT RECOGNITION

 

DESIGN AND CONSTRUCTION OF A BI-DIRECTIONAL VISITORS COUNTER

DESIGN & CONSTRUCTION OF NUMERIC CONTROLLED DOOR LOCKING SYSTEM
DESIGN AND CONSTRUCTION OF A TIME LOCK

DESIGN AND CONSTRUCTION OF AN ELECTRONIC LOCK

DESIGN AND CONSTRUCTION OF A CORDLESS POWER CONTROLLER (CPC)

DESIGN AND CONSTRUCTION OF AN AUTOMATIC LIGHT DIM DEEP CONTROLLER

DESIGN AND CONSTRUCTION OF  A E-CASH PAY OFF FUEL STATION

DESIGN OF A MEDICAL MONITORING SYSTEM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC PLANT IRRIGATION SYSYTEM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC CONVEYOR FOR INDUSTRIAL AUTOMATION

DESIGN AND CONSTRUCTION OF AN ATTENDANCE MANAGEMENT USINNNG FACE RECOGNITION SYSTEM

DESIGN AND CONSTRUCTION OF AN ACCIDENT ALERT IN MODERN TRAFFIC SYSTEM WITH CAMERA

DESIGNING A RF GSM MOBILE JAMMER

DESIGN AND CONSTRUCTION OF A TIMER BASED CODE LOCK

CONSTRUCTION AND DESIGN OF A 6V RECHARGEABLE LAMP

DESIGN OF A DIGITAL TACHOMETER

DESIGN OF A TACHOMETER

DESIGN AND CONSTRUCTION OF AN RFID BASED SECURITY SYSTEM


DESIGN AND CONSTRUCTION OF AN OPTIMUM ENERGY MANAGEMENT SYSTEM

DESIGN AND CONSTRUCTION OF A PROXIMITY SENSOR

DESIGN AND CONSTRUCTION OF A PIR SENSOR BASED SECURITY SYSTE

DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING IKVA, 240V/110, 80 12V, 6V

DESIGN AND CONSTRUCTION OF FIRE ALARM SYSTEM USING LIGHT DEPENDENT RESISTOR (LDR)


DESIGN AND CONSTRUCTION OF A MAGNETIC PROXIMITY SWITCH

DISCUSS THE PROCEDURES OF HOUSE WIRING, AND USES OF FUSE AND SWITCHES

CONSTRUCTION OF PVS CONDUIT WIRING SYSTEM OF TWO BEDROOM BUNGALOW

DESIGN AND CONSTRUCTION OF A GSM MODEM/PHONE  MONITOR AND CONTROL ELECTRICAL DEVICES

DESIGN AND CONSTRUCTION OF A GSM BASED AUTOMATIC ENERGY METER READING SYSTEM 

DESIGN OF GPS DATA LOGGER INTO MMC/SD MEMORY CAR

DESIGN AND FABRICATION OF FRICTIONLESS ELECTROMAGNETIC BRAKING SYSTEM (FOR MECH ENGINE)

DESIGN OF AN INTELLIGENT TRAFFIC CONTROL SYST M


DESIGN AND CONSTRUCTION OF A ENERGY CONSUMPTION INDICATOR

DESIGN AND CONSTRUCTION OF A BREAK FAILURE INDICATOR FOR FOUR WHEELS


DESIGN AND CONSTRUCTION OF A GSM-BASED WIRELESS HOME APPLIANCES

DESIGN AND CONSTRUCTION OF A 3-PHASE IRRIGATION WATER PUMP CONTROLLER F USING DUAL GSM MODEMS

DESIGN AND CONSTRUCTION OF BATTERY LEVEL INDICATOR

DESIGN AND CONSTRUCTION OF DEAD MAN'S SWITCH

EXPLOSIVE DETECTION SYSTEM

DESIGN AND CONSTRUCTION OF A PASSWORD BASED CIRCUIT BREAKER

DESIGN AND CONSTRUCTION OF A HUMAN DETECTION ROBOT

DESIGN AND CONSTRUCTION OF A PROGRAMMABLE THERMOSTAT

DESIGN AND CONSTRUCTION OF A MEDICAL ALARM

DESIGN AND CONSTRUCTION OF A GAS DETECTOR

DESIGN AND CONSTRUCTION OF A DIGITAL STOP WATCH

DESIGN AND CONSTRUCTION OF A WIRELESS SCADA TELEMETRY RADIOS

DESIGN AND CONSTRUCTION OF AN AUTOMATIC DOOR BELL WITH OBJECT DETECTION

DESIGN AND CONSTRUCTION OF A ELECTRONIC SIREN

DESIGN AND CONSTRUCTION OF A JET ENGINE SOUND GENERATOR

DESIGN AND CONSTRUCTION OF WHISTLE TO BEEP

WORKING OF LIQUID CRYSTAL DISPLAYS (LCD)

WORKING OF SCANNER

DESIGN AND CONSTRUCTION OF A SIMPLE EMERGENCY LIGHT

THE DESIGN AND CONSTRUCTION OF A 2.5KVA AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION DOOR KNOCK ALARM

DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED ELECTRONIC VOTING MACHINE (EVM)

DESIGN AND CONSTRUCTION OF AN UNREGULATED POWER SUPPLY

DESIGN AND CONSTRUCTION OF A DIGITAL CLOCK

DESIGN AND CONSTRUCTION OF AN ELECTRONIC CODE LOCK WITH USER DEFINED PASSWORD USING 8051 MICROCONTROLLER

DESIGN AND CONSTRUCTION OF AN ELECTRONIC WATCH DOG

DESIGN AND CONSTRUCTION OF AN ELECTRONIC FASTEST FINGER FIRST INDICATOR

DESIGN AND CONSTRUCTION OF A FLUORESCENT LAMP INVERTER

DESIGN AND CONSTRUCTION OF AN INTELLIGENT EMERGENCY LIGHT

DESIGN AND CONSTRUCTION OF A 5KVA D.C TO A.C INVERTER SYSTEM


DESIGN AND CONSTRUCTION OF A LEVEL SENSOR


DESIGN AND CONSTRUCTION OF A LIMIT SWITCH


THE DESIGN AND CONSTRUCTION OF A
PHASE SEQUENCE CHECKER FOR THREE PHASE SUPPLY

DESIGN AND CONSTRUCTION OF A
PHASE SEQUENCE CHECKER FOR THREE PHASE SUPPLY

DESIGN AND CONSTRUCTION OF A 5V AND 12V POWER SUPPLY


DESIGN AND CONSTRUCTION OF A
TOGGLE ON / OFF SWITCH

DEVELOPMENT OF CONSTANT HEAD WATER SUPPLY


DESIGN AND CONSTRUCTION OF A WATER LEVEL INDICATOR


DESIGN AND CONSTRUCTION OF A WIRE LOOP BREAKING ALARM SYSTEM


DESIGN AND CONSTRUCTION OF A WIRELESS ELECTRICAL APPLIANCES CONTROL SYSTEM USING IR COMMUNICATION


DESIGN AND CONSTRUCTION OF A
WIRELESS POWER TRANSFER

DESIGN AND CONSTRUCTION OF A NOTICE BOARD USING LED

DESIGN AND CONSTRUCTION OF A 9V AND 12V REGULATED POWER SUPPLY

DESIGN AND CONSTRUCTION OF A  12V AND 15V REGULATED  POWER SUPPLY

DESIGN AND CONSTRUCTION OF A VARIABLE POWER SUPPLY

DESIGN AND CONSTRUCTION OF A MULTIPURPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY

DESIGN AND CONSTRUCTION OF AN UNREGULATED POWER SUPPLY

DESIGN AND CONSTRUCTION OF A 9V REGULATED POWER SUPPLY

DIGITAL IC TESTER USING AT89s52 MICROCONTROLLER

THE DESIGN AND CONSTRUCTION OF A METAL DETECTOR

DEVELOPMENT OF CONSTANT HEAD WATER SUPPLY

THE DESIGN AND CONSTRUCTION OF A SOLAR STREET LIGHT

DESIGN AND CONSTRUCTION OF BATTERY CHARGER

THE DESIGN AND CONSTRUCTION OF A 12 VOLTS AUTHOMATIC BATTERY CHARGE

THE DESIGN AND CONSTRUCTION OF AN AUTOMATIC CHANGEOVER SWITCH WITH GENERATOR TRIP-OFF DEVICE

APPLICATION OF ARTIFICIAL INTELLIGENCE IN AUTOMATIC DOOR

DESIGN AND CONSTRUCTION OF AN AUDIO VISUAL TIMER

DESIGN AND CONSTRUCTION OF AN AUTOMATIC WATER LEVEL INDICATOR (WITH TRANSISTOR)

DETERMINATION OF ASCORBIC ACID IN SOME SELECTED FRUIT BY UV METHODOLOGY

EFFECT OF INSECTICIDE ON MANGO AND ITS CONTROL

THE IMPACT OF GSM JAMMER ON SERVICE DELIVERY AND ITS APPLICATIONS IN LECTURE AUDITORIUM

CONTRIBUTION OF ROAD INFRASTRUCTURE TO ENVIRONMENTAL DEGRATION
(LAGOS STATE AS A CASE STUDY)

DESIGN AND CONSTRUCTION OF AN AUTOMATIC SCHOOL BELL

STATISTICAL ANALYSIS OF THE EFFECT OF SECRET CULT IN OUR TERTIARY INSTITUTION
(A CASE STUDY OF SOME SELECTED TERTIARY INSTITUTION IN EDO STATE)

COMPARATIVE STUDY BETWEEN INTERMITTENT AND CONTINOUS GAS LIFT SYSTEM USED IN NIGER DELTA

GSM PRODUCT BRAND AND ITS IMPLICATION TO CUSTOMERS LOYALTY IN UNIVERSITY OF PORTHARCOURT, RIVERS STATE UNIVERSITY OF SCIENCE AND TECHNOLOGY AND IGNATIUS AJURU UNVERSITY

DESIGN AND CONSTRUCTION OF AN AUTOMATIC HOUSEHOLD POWER DISTRIBUTION SYSTEM

DESIGN AND CONSTRUCTION OF A BATTERY LEVEL INDICATOR

DESIGN AND CONSTRUCTION OF A BATTERY LEVEL INDICATOR USING LM339 IC

DESIGN AND CONSTRUCTION OF A BATTERY LEVEL INDICATOR USING LM3914

SWITCH GEAR MAINTENANCE

INSTALLATION, OPERATION AND MAINTENANCE OF SWITCH GEAR

ANALYSIS OF THE 2006 POPULATION CENSUS FIGURES FOR DELTA STATE

EMPERICAL ANALYSIS OF PUBLIC DEBTS ON THE ECONOMIC GROWTH IN NIGERIA FROM 1960-2012.

THE IMPACT OF GLOBALISATION ON MANAGEMENT IN NIGERIA.
(A CASE STUDY OF NITEL ENUGU)


SOLAR PRINCIPLES AND DESIGN OF SOLAR PANEL

DESIGN AND CONSTRUCTION OF A REMOTE CONTROLLED FAN REGULATOR

THE IMPACT OF TELEVISION BROADCASTING IN THE NATIONS ANTI-CORRUPTION CRUSADE

DESIGN AND CONSTRUCTION OF A VARIABLE POWER SUPPLY

DESIGN AND CONSTRUCTION OF A TWO-WAY WIRELESS AUDIO ALERT SMOKE DETECTOR


PROTECTION OF A 33KV TRANSMISSION LINE

THE ROLE OF TRANSPORTATION IN HOSPITALITY INDUSTRY

RECENT ADVANCES IN THERAPEUTIC APPLICATION OF CAFFEINE

CONSTRUCTION OF A MOTOR STARTER/CONTROLLER

DESIGN OF FINGERPRINT VOTING MACHINE

BODY MASS INDEX AND BLOOD PRESSURE ON SOME PATIENT OF DASIT SPECIALIST HOSPITAL IN LAFIA BETWEEN THE AGE OF 20 – 80 YEARS.

DESIGN AND CONSTRUCTION OF A PROXIMITY DETECTION SENSOR

DESIGN AND FABRICATION OF A VACUUM CLEANER

DESIGN AND CONSTRUCTION RECHARGEABLE AC LAMP USING ENERGY BULB


DESIGN AND CONSTRUCTION OF A HEART BEAT MONITOR

CONSTRUCTION AND INSTALLATION OF 1.5 HORSE POWER OF WINDOW UNIT AC

DETERMINATION OF SUGAR CONTENT IN PINEAPLE FRUITS

DIGITAL TALLY CARD FOR CAR FLOW MONITORING
 (A CASE STUDY OF RUFUS GIWA POLYTECHNIC TRAFFIC SYSTEM)

EFFECTS OF URBAN LAND USE PLANNING AND MANAGEMENT ON THE DEVELOPMENT OF BENUE STATE


STERILIZATION OF MICROORGANISM FOUND IN FOOD ITEM (TOMATOES) USING UV LIGHT


PROGRAMMABLE CONTROL OF INVERTED FED INDUCTION MOTOR USING CONTROLLER

MICROPROCEESOR TRAINING MUDULE SUBSECTION USING SEVEN SEGMENT DISPLAY

DESIGN AND CONSTRUCTION OF AN INFRARED
SHADOW DETECTOR WITH AN ALARM

DESIGN AND CONSTRUCTION OF A CAR PARKING GUARD CIRCUIT

DESIGN AND CONSTRUCTION OF A 2KVA AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF A 2.5VA AUTOMATIC VOLTAGE STABILIZER

************************************

DESIGN AND CONSTRUCTION OF A 3KVA AUTOMATIC VOLTAGE STABILIZER


************************************

DESIGN AND CONSTRUCTION OF A 3.5KVA AUTOMATIC VOLTAGE STABILIZER

DESIGN AND CONSTRUCTION OF A SOLAR RECHARGEABLE STANDING FAN

DESIGN AND CONSTRUCTION OF A SOLAR STANDING FAN

DESIGN AND CONSTRUCTION OF A DIGITAL BILLING BOARD


DESIGN AND CONSTRUCTION OF A PASSWORD BASED CIRCUIT BREAKER


DESIGN AND CONSTRUCTION OF FULL DUPLEX INTERCOM

DESIGN AND CONSTRUCTION OF HALF DUPLEX INTERCOM


DESIGN AND CONSTRUCTION OF A 2-WAY TRAFFIC LIGHTING SYSTEM

DESIGN AND CONSTRUCTION OF A 3-WAY TRAFFIC LIGHTING SYSTEM

DESIGN AND CONSTRUCTION OF A 2-WAY TRAFFIC LIGHTING SYSTEM USING 555 TIMER AND CD4017 COUNTER

THE DESIGN AND CONSTRUCTION OF 2-WAY WIRED INTERCOM

DESIGN, CONSTRUCTION AND ANALYSIS OF A 2KVA AUTOMATIC VOLTAGE REGULATORY SYSTEM WITH SEVEN SEGMENT DISPLAY

DESIGN, CONSTRUCTION AND ANALYSIS OF A MICROCONTROLLER BASED DIGITAL AC/DC VOLTMETER

ASSEMBLING OF PENTIUM-4 COMPUTER

ASSEMBLING OF PENTIUM-4 COMPUTER

WITH MULTIPURPOSE PRINTER AND UPS


DESIGN AND CONSTRUCTION OF A CHRISTMAS LIGHT

DESIGN OF A FINGERPRINT BASED SECURITY SYSTEM

DESIGN AND CONSTRUCTION RECHARGEABLE  LANTERN USING LED

WEB BASED BUG TRACKING SYSTEM

DESIGN AND CONSTRUCTION OF A SOLAR POWERED AMPLIFIER

DESIGN AND CONSTRUCTION OF A 1KVA PURE SINEWAVE POWER INVERTER SYSTEM

DESIGN AND CONSTRUCTION OF 5KVA TRANSFORMER WITH A VARIABLE OUTPUT VOLTAGE

DESIGN AND CONSTRUCTION OF A 3-CHANNEL MICROPHONE MIXER

DESIGN AND CONSTRUCTION OF A DIGITAL STOPWATCH WITH 7-SEGMENT

DESIGN AND CONSTRUCTION OF A DIGITAL VOLTMETER USING PIC MICROCONTROLLER 16F877A AND SEVEN SEGMENTS DISPLAY (0-30V)

DESIGN AND CONSTRUCTION OF A DIGITAL SIGNAGE

DESIGN AND CONSTRUCTION OF A DIGITAL VOLTMETER WITH LED DISPLAY USING THE ICL7107

DESIGN AND CONSTRUCTION OF A DOT MATRIX LED DISPLAY

DESIGN AND CONSTRUCTION OF A
SEVEN SEGMENT DISPLAY DIGITAL CLOCK WITH IC MM5314N

DESIGN AND CONSTRUCTION OF A 6V RECHARGEABLE LANTERN

DESIGN AND CONSTRUCTION OF A FIELD EFFECT TRANSISTOR AMPLIFIER

DESIGN AND CONSTRUCTION OF AN INDUSTRIAL GAS BURNER

DESIGN AND CONSTRUCTION OF A 220V/110V STEP DOWN TRANSFORMER

DESIGN AND CONSTRUCTION OF 8051 BASED TEMPERATURE CONTROLLED AUTOMATIC AIR CONDITIONING SYSTEM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC EMERGENCY LIGHTING SYSTEM WITH BATTERY OVER-CHARGE PROTECTION CIRCUIT

DESIGN OF POWER SWITCHING AND DISTRIBUTION CIRCUITS FOR SOLAR POWER GENERATION

CONSTRUCTION OF “5” LITER ELECTRIC KETTLE

DEVELOPMENT OF ANTIRIGGING VOTING SYSTEM USING FINGER PRINT

DESIGN AND CONSTRUCTION OF AN INTRUDER ALARM / BURGLAR ALARM BASED HOME SECURITY SYSTEM

DESIGN AND CONSTRUCTION OF FASTEST FINGER FIRST USING 8051 MICROCONTOLLER

DESIGN AND CONSTRUCTION OF A MULTIPURPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY

DESIGN AND CONSTRUCTION OF MICROCONTROLLER BASED PC PROJECT-OPENING FILES ON PC USING REMOTE

DESIGN AND CONSTRUCTION OF A POWERBANK

DESIGN AND CONSTRUCTION OF AN INTELLIGENT CHARGERS

DESIGN AND CONSTRUCTION OF A 12V INTELLIGENT CHARGER

DESIGN AND CONSTRUCTION OF A 9v INTELLIGENT CHARGERS

DESIGN AND CONSTRUCTION OF A UNIVERSAL BATTERY CHARGER

DESIGN AND CONSTRUCTION OF A SIMPLE CHARGER

DESIGN AND CONSTRUCTION OF A FAST CHARGER

CONSTRUCTION OF SIMPLE THERMOCOUPLES AND DETERMINATION OF THEIR TEMPERATURE RESPONSES CAPABILITIES

ALL ELECTRICAL AND ELECTRONICS ENGINEERING PROJECT TOPIC AND MATERIAL

DESIGN AND CONSTRUCTION OF A 100W AUDIO POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF A 25 WATT POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF 30 WATT AUDIO POWER AMPLIFIER

DESIGN AND CONSTRUCTION OF AN INDUCTIVE CHARGERS

DESIGN OF A TRANSCEIVER FOR UWB COMMUNICATION SYSTEM

RELATIONSHIP BETWEEN TEACHER'S MOTIVATION AND STUDENTS ACADEMIC PERFORMANCE OF STUDENTS IN JUNIOR SECONDARY SCHOOL

DESIGN AND CONSTRUCTION OF AN AUTOMATIC EMERGENCY LIGHTING SYSTEM WITH BATTERY OVER-CHARGE PROTECTION CIRCUIT

DESIGN AND CONSTRUCTION OF AN AUTOMATIC CHANGEOVER WITH LDR SENSING AND SWITCHING

DESIGN AND CONSTRUCTION OF A WATER LEVEL INDICATOR WITH SINGLE 7 SEGMENT LED DISPLAY

CONSTRUCTION OF A TRAVELATOR

LOW COST 50 WATTS INVERTER FOR FLUORESCENT LAMP USING
ELECTRONIC CHOKE CONTROLLED BY TIMER

DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED AUTOMATIC 3-PHASE SELECTOR

DESIGN AND CONSTRUCTION OF POWER BOOSTER/
POWER OPTIMIZER

DESIGN AND CONSTRUCTION OF A 1. 5A  35 VOLT DC REGULATED POWER SUPPLY

DESIGN OF A SUN TRACKING SOLAR PANEL SYSTEM

DESIGN AND CONSTRUCTION OF AN INTELLIGENT AUTOMATIC PLANT IRRIGATION SYSTEM

A PRACTICAL STUDY ON PROCEDURE TECHNIQUES ON MAJOR ASSEMBLING OF COMPUTER DEVICE

(CASE STUDY INTERNAL COMPONENT OF A COMPUTER DEVICE)


THE IMPACT OF EARLY MARRIAGE AND ITS PERCEIVED NEGATIVE IN LAU LGA METROPOLIS ON FEMALE ACADEMIC PERFORMANCE

SOIL CONTAMINATION ON ILOKUN OPEN WASTE DUMP

DESIGN AND CONSTRUCTION OF STAR AND DELTA ELECTRIC MOTOR

THE DESIGN AND CONSTRUCTION OF A 45 WATT AUDIO AMPLIFIER

DESIGN AND CONSTRUCTION OF A MINI PIANO USING 555 TIMERS

THE DESIGN AND CONSTRUCTION OF A THREE PHASE AUTOMATIC PHASE SELECTOR

DESIGN AND CONSTRUCTION OF A PHASE FAILURE DETECTOR

DESIGN AND CONSTRUCTION OF A PHASE FAILURE DETECTOR AND ITS SIGNIFICANCE FOR THREE PHASE POWER SUPPLY

DESIGN AND CONSTRUCTION OF A PHASE FAILURE CONTROLLER FOR THREE PHASE EQUIPMENT

DESIGN AND CONSTRUCTION OF 2KVA TRANSFORMER WITH MULTIPLE INPUT TAPS AND 18V OUTPUT

CONSTRUCTION OF A VOLTAGE-OPERATED EARTH LEAKAGE PROTECTION SYSTEM

DESIGN AND CONSTRUCTION OF A  METAL DETECTOR USING 555 TIME

CONSTRUCTION OF A DRIVER STAGE OF A 100W AUDIO AMPLIFIER

CLINICAL LABORATORY HAZARDS AND PREVENTIVE MEASURES

DESIGN AND CONSTRUCTION OF AN AUTOMATIC BREAK FAILURE INDICATOR

DESIGN AND CONSTRUCTION OF A POWER RESTORATION ALARM

CURRENT ELECTRICAL  AND ELECTRONICS PROJECT TOPICS/MATERIALS

ELECTRICAL  AND ELECTRONICS PROJECT TOPICS/MATERIALS

DESIGN AND CONSTRUCTION OF RECHARGEABLE LANTERN WITH MORNING ALARM

DESIGN AND CONSTRUCTION OF AUTOMATIC NIGHT LAMP WITH MORNING ALARM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC EMERGENCYLAMP WITH MORNING ALARM

DESIGN AND CONSTRUCTION OF SOLAR RECHARGEABLE LANTERN

DESIGN AND CONSTRUCTION OF AN AUTOMATIC EMERGENCY LIGHTING SYSTEM

DESIGN AND CONSTRUCTION SOLAR RECHARGEABLE AC LANTERN USING LED

DESIGN AND CONSTRUCTION OF A YAGI UDA ANTENNA

DESIGN AND CONSTRUCTION OF A WIRELESS VIDEO RECEIVER AND WIRELESS VIDEO TRANSMITTER

DESIGN AND CONSTRUCTION OF A WIRELESS VIDEO TRANSMITTER

DESIGN AND CONSTRUCTION OF A WIRELESS VIDEO RECEIVER

DESIGN AND CONSTRUCTION OF A TV TRANSMITTER

DESIGN AND CONSTRUCTION OF A WIRELESS FMTRANSMITTER

CONSTRUCTION OF METALLIC BOOK SHELVE


DESIGN AND CONSTRUCTION OF ATV AUDIO VIDEO TRANSMITTER

DESIGN AND CONSTRUCTION OF AN IC BASED TV TRANSMITTER

DESIGN AND CONSTRUCTION OF A LOW FUEL INDICATOR SYSTEM

DESIGN AND CONSTRUCTION OF A SOLAR CONTROLLED IRRIGATION SYSTEM

FABRICATION OF PNEUMATIC CRANE

DESIGN AND CONSTRUCTION OF A LPG SENSOR USING ARDUINO WITH ALARM AND CUTOFF

AUTOMATIC ARMED ROBBERY PROTECTIVE SYSTEM USING GSM

DESIGN AND CONSTRUCTION OF A YAGI-UDA ANTENNA FOR LOCAL TELEVISION STATION

DESIGN AND CONSTRUCTION OF AN AUTOMATIC VEHICLE DETECTOR USING RFID TECHNOLOGY

A COMPARATIVE ANALYSIS OF WIMAX, MICROWAVE RADIO AND LONG TERM EVOLUTION (LTE) TECHNOLOGIES FOR A BROADBAND INTERNET ACCESS NETWORK

VEHICLE TRACKING SYSTEM USING GPS AND GSM MODEM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC SOIL MOISTURE SENSING AND WATERING SYSTEM

DESIGN AND CONSTRUCTION OF STAR AND DELTA, FORWARD AND BACKWARD ELECTRIC MOTOR

DESIGN AND CONSTRUCTION OF FORWARD AND REVERSE DIRECT ONLINE MOTOR STARTER

DESIGN AND CONSTRUCTION OF STAR AND DELTA ELECTRIC MOTOR PANEL FOR A 5HP MOTOR

DESIGN AND CONSTRUCTION OF STAR AND DELTA ELECTRIC MOTOR

DESIGN AND CONSTRUCTION OF A DIGITAL TRAINERS SYSTEM

PERCEIVED EFFECT OF CULTIC ACTIVITIES ON SOCIAL RELATIONSHIPS AMONG STUDENTS ON THE CAMPUS OF THE UNIVERSITY OF IBADAN

DESIGN AND CONSTRUCTION OF A FINGERPRINT BIOMETRIC

FABRICATION OF GASOLINE  ARC WELDING MACHINE

DESIGN AND CONSTRUCTION OF AN AUTOMATIC VEHICLE DETECTOR USING RFID TECHNOLOGY

DESIGN AND CONSTRUCTION OF WIRELESS MOTION DETECTOR

DESIGN AND CONSTRUCTION OF A SECURITY MOTION DETECTOR SYSTEM

DESIGN AND CONSTRUCTION OUTDOOR MOTION DETECTOR WITH ALARM

DESIGN AND CONSTRUCTION OF SECURITY MOTION SENSOR

DESIGN AND CONSTRUCTION OF A MOVEMENT DETECTORS HOME SECURITY

DESIGN AND CONSTRUCTION OF A OUTDOOR WIRELESS MOTION DETECTOR ALARM

DESIGN AND CONSTRUCTION OF A WIRELESS MOTION DETECTOR LIGHTS

DESIGN AND CONSTRUCTION OF A WIRELESS MOTION DETECTOR ALARM

DESIGN AND CONSTRUCTION OF A HOMESAFE WIRELESS OUTDOOR SECURITY ALERT SENSOR DETECTOR DRIVEWAY MOTION ALARM

DESIGN AND CONSTRUCTION OF A GSM BASED FIRE ALARM SYSTEM

DESIGN AND CONSTRUCTION OF A 60A THREE PHASE AUTOMATIC CHANGEOVER SWITCH USING MICROCONTROLLER

DESIGN AND CONSTRUCTION OF A VOLTAGE AMPLIFIER

DESIGN AND CONSTRUCTION OF A STEP ALARM CIRCUIT

DESIGN AND CONSTRUCTION OF AN ENTRY ALARM CIRCUIT

DESIGN AND CONSTRUCTION OF A RAIN DETECTOR (ALARM)

DESIGN AND CONSTRUCTION OF A USB AIR CONDITION

DESIGN AND CONSTRUCTION OF A TV AUDIO VIDEO TRANSMITTER

DESIGN AND CONSTRUCTION OF A STREET LIGHTS THAT GLOW ON DETECTING VEHICLE MOVEMENT

DESIGN AND CONSTRUCTION RFID BASED HIGHWAY TOLL TAX COLLECTION SYSTEM

DESIGN AND CONSTRUCTION RFID BASED ATTENDANCE MANAGEMENT SYSTEM

DESIGN AND CONSTRUCTION OF REMOTE MONITORING SYSTEM CONTROL SYSTEM WITH AUTOMATIC IGNITION SYSTEM USING GSM BLUETOOTH

DESIGN AND CONSTRUCTION OF AN ON-OFF SWITCH CIRCUIT USING A 555 TIMER

DESIGN AND CONSTRUCTION OF A ONE TRANSISTOR CODE LOCK

DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED SECURITY ACCESS CONTROL SYSTEM USING RFID

DEVELOPMENT OF A LYSIMETER TO MEASURE THE EVAPOTRANSPIRATI-ON OF A PLANT

DESIGN AND CONSTRUCTION OF AN AUTOMATIC SOIL MOISTURE SENSING AND WATERING SYSTEM

DESIGN AND CONSTRUCTION OF AN AUTOMATIC SPEED CONTROLLER FOR FANS AND COOLERS

DESIGN AND CONSTRUCTION OF BATTERY CHARGER CIRCUIT USING SCR AND LM317

DESIGN AND CONSTRUCTION OF A 500VA INVERTER

DESIGN AND CONSTRUCTION OF AN ALCOHOL SENSING DISPLAY WITH ALARM

DESIGN AND FABRICATION GAS BURNER

ASSESSMENT OF OCCUPATIONAL EXPOSURE LEVEL OF RADIATION
(CASE STUDY UNIVERSITY OF MAIDUGURI TEACHING HOSPITAL)

DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM

FLUORESCENCE EFFECT AND ABSORPTION RATE OF X-RAY RADIATION ON ALUMINIUM AND ZINC

FLUORESCENCE EFFECT AND ABSORPTION RATE OF X-RAY RADIATION ON ALUMINIUM AND COPPER

FLUORESCENCE EFFECT AND ABSORPTION RATE OF X-RAY RADIATION ON COPPER AND ZINC

DESIGN AND CONSTRUCTION OF 3-BAND DUAL GRAPHIC EQUALIZER

DESIGN AND CONSTRUCTION OF AN AUDIO EQUALIZER AMPLIFIER

DESIGN AND CONSTRUCTION OF HOME THEATRE AUDIO AMPLIFIER

DESIGN AND CONSTRUCTION OF A 30KM RANGE FM TRANSMITTER USING DISCRETE COMPONENTS

BACTERIAL CONTAMINANTS ASSOCIATED WITH COMMERCIAL POULTRY FEEDS

DESIGN AND CONSTRUCTION OF A 500WA SINEWAVE POWER INVERTER SYSTEM

EFFECT OF SURE-P ON MATERNAL MORTALITY REDUCTION

DESIGN AND CONSTRUCTION OF CAR CONTROLLER USING TELEMETRY SYSTEM

DESIGN AND CONSTRUCTION OF A SINE WAVE INVERTER/ H.UPS (600 VA TO 2000 VA)

DESIGN AND CONSTRUCTION OF A QUASI SINE WAVE INVERTER / H.UPS (300 VA TO 1500 VA)

DESIGN AND CONSTRUCTION OF A STATIC SINE WAVE UPS WITH LCD (2 KVA TO 15 KVA)

DESIGN AND CONSTRUCTION OF A DSP BASE UPS (1200 VA TO 12 KVA)

DESIGN AND CONSTRUCTION OF A LIFT INVERTERS (6 KVA – 40 KVA)

INDUSTRIAL THREE PHASE INVERTER - (3 KVA TO 120 KVA)

DESIGN AND CONSTRUCTION OF AN ONLINE UPS - (3 KVA TO 120 KVA)

DESIGN AND CONSTRUCTION OF A SOLAR HYBRID INVERTER (100 VA TO 10 KVA)

DESIGN AND CONSTRUCTION OF A SOLAR PCU WITH PWM CHARGER (800 VA TO 120 KVA)

DESIGN AND CONSTRUCTION OF A SOLAR PCU WITH MPPT CHARGER

DESIGN AND CONSTRUCTION OF A SOLAR CHARGE CONTROLLER (PWM & MPPT)

SOLAR BATTERY
DESIGN AND CONSTRUCTION OF A SOLAR MANAGEMENT UNIT

ESTIMATION OF FOOD WASTE IN A CITY, FOOD WASTE CHARACTERISTICS AND BIO ETHANOL POTENTIALS OF FOOD

DESIGN AND CONSTRUCTION OF SWEEPING TONE ALARM BEEPER

DESIGN AND CONSTRUCTION OF TRANSISTOR ORGAN

DESIGN AND CONSTRUCTION OF AN AUTOMATIC WASH BASIN MIRROR LAMP CONTROLLER

DESIGN AND CONSTRUCTION OF WAILING ALARM

DESIGN AND CONSTRUCTION OF DUAL POWER SUPPLY

DESIGN AND CONSTRUCTION OF AUDIO POWER INDICATOR

DESIGN AND CONSTRUCTION OF SUBWOOFER AUDIO AMPLIFIER

 

 

 

WELCOME TO MYPROJECTCIRCUITS.COM

(A reliable home for students' project asisstance)

This site is owned and managed by Engineer Innocent. Engineer Innocent is a project designer, fabricator, researcher, with many years experience on project writing, design and construction. Engineer Innocent is a full-time Engineer with theory and practical knowledge of electrical and electronic drafting, and had assisted thousands of Students (both in Nigeria and outside Nigeria)on their projects and seminars...READ MORE

All Project Topics on this site have complete 5(five) Chapters . Each Project Material include: Abstract + Introduction + etc + Literature Review + Methodology/construction +circuit diagram(where applicable) + etc + Conclusion + Recommendation + References/Bibliography.

PLEASE SELECT YOUR DEPARTMENT AND LEVEL BELOW, THEN CLICK ON IT

(e.g HND EE.)

 

HND B.SC ELECTRICAL/ELECTRONIC ENGINEERING TOPICS/MATERIALS

click HERE to view topics

OND ELECTRICAL/ELECTRONIC ENGINEERING TOPICS/MATERIALS

click HERE to view topics

MICROCONTROLLER BASED ELECTRONICS TOPICS/MATERIALS

click HERE to view topics

SOLAR ENERGY BASED ELECTRONICS PROJECT TOPICS/MATERIALS

click HERE to view topics

RFID BASED ELECTRONICS PROJECT TOPICS/MATERIALS

click HERE to view topics

GSM BASED ELECTRONICS PROJECT TOPICS/MATERIALS

click HERE to view topics

POWER ENGINEERING PROJECT TOPICS/MATERIALS

click HERE to view topics

RFID BASED ELECTRONICS PROJECT TOPICS/MATERIALS

click HERE to view topics

HND MECHANICAL ENGINEERING PROJECT TOPIC/MATERIAL

click HERE to view topics

OND MECHANICAL ENGINEERING PROJECT TOPIC/MATERIAL

click HERE to view topics

HND INDUSTRIAL PHYSICS/PHYSICS ELECTRONICS PROJECT TOPIC/MATERIAL

click HERE to view topics

OND INDUSTRIAL PHYSICS/PHYSICS ELECTRONICS PROJECT TOPIC/MATERIAL

click HERE to view topics

ELECTRICAL/ELECTRONICS SEMINAR TOPICS

click HERE to view topics

ELECTRICAL/ELECTRONICS SEMINAR TOPICS

click HERE to view topics

TELECOMMUNICATION(TELECOM) ENGINEERING PROJECT TOPICS

click HERE to view topics

ELECTRONICS  AND COMPUTER ENGINEERING (ECE) TOPICS/MATERIALS

click HERE to view topics

WIRELESS COMMUNICATION PROJECT TOPICS/MATERIALS

click HERE to view topics

PETRO-CHEMICAL ENGINEERING TOPICS/MATERIALS

click HERE to view topics

AGRICULTURAL ENGINEERING TOPICS/MATERIALS

click HERE to view topics/materials

NCE AGRICULTURAL EDUCATION/ENGINEERING PROJECT TOPICS/MATERIALS

click HERE to view topics/materials

CIVIL ENGINEERING PROJECT TOPICS/MATERIALS

click HERE to view topics/materials

 

SEMINAR TOPICS

click HERE to view topics/materials

DIFFERENT CATEGORIES OF ELECTRICAL/ELECTRICAL ENGINEERING PROJECT TOPICS/MATERIALS

click HERE to view topics/materials

 

OUR SERVICES

Our work is to assist you in your project material, design and construction. All our materials are complete and well researched project materials strictly for academic purposes, which have been approved by different Lecturers from different higher institutions/college.

We are into design and construction of any electrical/electronics project topics listed on our page, with many years experience. During our construction, we teach our students/clients step-by-step on how their project construction is been done, all are on one-on-one basis.

We are offering training for students, I.T students and individuals on:
1. basics of electronics,
2. electronics drafting 

3. one-on-one training on how to design  and construct any of the topics listed on this site.
4.We also give project topics and material for all departments.

For more information contact Engineer Innocent on: +2347065923793(MTN) or Email –engrinnocent2@gmail.com or ubani.innocent@yahoo.com, or visit us @ our office.

ANAMBRA OFFICE ADDRESS:


NO. 36 ORLU ROAD IHIALA,

ANAMBRA STATE, NIGERIA.
CONTACT PHONE NO: +2347065923793(MTN)


 

ABUJA OFFICE ADDRESS:


NO. 3 NASARAWA ROAD BY ABAJI JUNCTION,
(OPPOSITE FIRST BANK), ABAJI L.G.A, ABUJA, NIGERIA.
CONTACT PHONE NO: +2347065923793(MTN)

 

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DON'T FORGET TO TELL YOUR FRIENDS AND COURSEMATES ABOUT US.